*ft_rust.txt* Filetype plugin for Rust ============================================================================== CONTENTS *rust* 1. Introduction |rust-intro| 2. Settings |rust-settings| 3. Commands |rust-commands| 4. Mappings |rust-mappings| ============================================================================== INTRODUCTION *rust-intro* This plugin provides syntax and supporting functionality for the Rust filetype. It requires Vim 8 or higher for full functionality. Some commands will not work on earlier versions. ============================================================================== SETTINGS *rust-settings* This plugin has a few variables you can define in your vimrc that change the behavior of the plugin. Some variables can be set buffer local (`:b` prefix), and the buffer local will take precedence over the global `g:` counterpart. *g:rustc_path* g:rustc_path~ Set this option to the path to rustc for use in the |:RustRun| and |:RustExpand| commands. If unset, "rustc" will be located in $PATH: > let g:rustc_path = $HOME."/bin/rustc" < *g:rustc_makeprg_no_percent* g:rustc_makeprg_no_percent~ Set this option to 1 to have 'makeprg' default to "rustc" instead of "rustc %": > let g:rustc_makeprg_no_percent = 1 < *g:rust_conceal* g:rust_conceal~ Set this option to turn on the basic |conceal| support: > let g:rust_conceal = 1 < *g:rust_conceal_mod_path* g:rust_conceal_mod_path~ Set this option to turn on |conceal| for the path connecting token "::": > let g:rust_conceal_mod_path = 1 < *g:rust_conceal_pub* g:rust_conceal_pub~ Set this option to turn on |conceal| for the "pub" token: > let g:rust_conceal_pub = 1 < *g:rust_recommended_style* g:rust_recommended_style~ Set this option to enable vim indentation and textwidth settings to conform to style conventions of the rust standard library (i.e. use 4 spaces for indents and sets 'textwidth' to 99). This option is enabled by default. To disable it: > let g:rust_recommended_style = 0 < *g:rust_fold* g:rust_fold~ Set this option to turn on |folding|: > let g:rust_fold = 1 < Value Effect ~ 0 No folding 1 Braced blocks are folded. All folds are open by default. 2 Braced blocks are folded. 'foldlevel' is left at the global value (all folds are closed by default). *g:rust_bang_comment_leader* g:rust_bang_comment_leader~ Set this option to 1 to preserve the leader on multi-line doc comments using the /*! syntax: > let g:rust_bang_comment_leader = 1 < *g:rust_use_custom_ctags_defs* g:rust_use_custom_ctags_defs~ Set this option to 1 if you have customized ctags definitions for Rust and do not wish for those included with rust.vim to be used: > let g:rust_use_custom_ctags_defs = 1 < Note that rust.vim's built-in definitions are only used for the Tagbar Vim plugin, if you have it installed--it is not automatically used when generating |tags| files that Vim can use to navigate to definitions across different source files. Feel free to copy `rust.vim/ctags/rust.ctags` into your own `~/.ctags` if you wish to generate |tags| files. *g:ftplugin_rust_source_path* g:ftplugin_rust_source_path~ Set this option to a path that should be prepended to 'path' for Rust source files: > let g:ftplugin_rust_source_path = $HOME.'/dev/rust' < *g:rustfmt_command* g:rustfmt_command~ Set this option to the name of the 'rustfmt' executable in your $PATH. If not specified it defaults to 'rustfmt' : > let g:rustfmt_command = 'rustfmt' < *g:rustfmt_autosave* g:rustfmt_autosave~ Set this option to 1 to run |:RustFmt| automatically when saving a buffer. If not specified it defaults to 0 : > let g:rustfmt_autosave = 0 < There is also a buffer-local b:rustfmt_autosave that can be set for the same purpose, and can override the global setting. *g:rustfmt_autosave_if_config_present* g:rustfmt_autosave_if_config_present~ Set this option to 1 to to have *b:rustfmt_autosave* be set automatically if a `rustfmt.toml` file is present in any parent directly leading to the file being edited. If not set, default to 0: > let g:rustfmt_autosave_if_config_present = 0 < This is useful to have `rustfmt` only execute on save, on projects that have `rustfmt.toml` configuration. There is also a buffer-local b:rustfmt_autosave_if_config_present that can be set for the same purpose, which can overrides the global setting. *g:rustfmt_fail_silently* g:rustfmt_fail_silently~ Set this option to 1 to prevent 'rustfmt' from populating the |location-list| with errors. If not specified it defaults to 0: > let g:rustfmt_fail_silently = 0 < *g:rustfmt_options* g:rustfmt_options~ Set this option to a string of options to pass to 'rustfmt'. The write-mode is already set to 'overwrite'. If not specified it defaults to '' : > let g:rustfmt_options = '' < *g:rustfmt_emit_files* g:rustfmt_emit_files~ If not specified rust.vim tries to detect the right parameter to pass to rustfmt based on its reported version. Otherwise, it determines whether to run rustfmt with '--emit=files' (when 1 is provided) instead of '--write-mode=overwrite'. > let g:rustfmt_emit_files = 0 *g:rust_playpen_url* g:rust_playpen_url~ Set this option to override the url for the playpen to use: > let g:rust_playpen_url = 'https://play.rust-lang.org/' < *g:rust_shortener_url* g:rust_shortener_url~ Set this option to override the url for the url shortener: > let g:rust_shortener_url = 'https://is.gd/' < *g:rust_clip_command* g:rust_clip_command~ Set this option to the command used in your OS to copy the Rust Play url to the clipboard: > let g:rust_clip_command = 'xclip -selection clipboard' < *g:cargo_makeprg_params* g:cargo_makeprg_params~ Set this option to the string of parameters to pass to cargo. If not specified it defaults to '$*' : > let g:cargo_makeprg_params = 'build' < Integration with Syntastic *rust-syntastic* -------------------------- This plugin automatically integrates with the Syntastic checker. There are two checkers provided: 'rustc', and 'cargo'. The later invokes 'Cargo' in order to build code, and the former delivers a single edited '.rs' file as a compilation target directly to the Rust compiler, `rustc`. Because Cargo is almost exclusively being used for building Rust code these days, 'cargo' is the default checker. > let g:syntastic_rust_checkers = ['cargo'] < If you would like to change it, you can set `g:syntastic_rust_checkers` to a different value. *g:rust_cargo_avoid_whole_workspace* *b:rust_cargo_avoid_whole_workspace* g:rust_cargo_avoid_whole_workspace~ When editing a crate that is part of a Cargo workspace, and this option is set to 1 (the default), then 'cargo' will be executed directly in that crate directory instead of in the workspace directory. Setting 0 prevents this behavior - however be aware that if you are working in large workspace, Cargo commands may take more time, plus the Syntastic error list may include all the crates in the workspace. > let g:rust_cargo_avoid_whole_workspace = 0 < *g:rust_cargo_check_all_targets* *b:rust_cargo_check_all_targets* g:rust_cargo_check_all_targets~ When set to 1, the `--all-targets` option will be passed to cargo when Syntastic executes it, allowing the linting of all targets under the package. The default is 0. *g:rust_cargo_check_all_features* *b:rust_cargo_check_all_features* g:rust_cargo_check_all_features~ When set to 1, the `--all-features` option will be passed to cargo when Syntastic executes it, allowing the linting of all features of the package. The default is 0. *g:rust_cargo_check_examples* *b:rust_cargo_check_examples* g:rust_cargo_check_examples~ When set to 1, the `--examples` option will be passed to cargo when Syntastic executes it, to prevent the exclusion of examples from linting. The examples are normally under the `examples/` directory of the crate. The default is 0. *g:rust_cargo_check_tests* *b:rust_cargo_check_tests* g:rust_cargo_check_tests~ When set to 1, the `--tests` option will be passed to cargo when Syntastic executes it, to prevent the exclusion of tests from linting. The tests are normally under the `tests/` directory of the crate. The default is 0. *g:rust_cargo_check_benches* *b:rust_cargo_check_benches* g:rust_cargo_check_benches~ When set to 1, the `--benches` option will be passed to cargo when Syntastic executes it. The benches are normally under the `benches/` directory of the crate. The default is 0. Integration with auto-pairs *rust-auto-pairs* --------------------------- This plugin automatically configures the auto-pairs plugin not to duplicate single quotes, which are used more often for lifetime annotations than for single character literals. *g:rust_keep_autopairs_default* g:rust_keep_autopairs_default~ Don't override auto-pairs default for the Rust filetype. The default is 0. ============================================================================== COMMANDS *rust-commands* Invoking Cargo -------------- This plug defines very simple shortcuts for invoking Cargo from with Vim. :Cargo *:Cargo* Runs 'cargo' with the provided arguments. :Cbuild *:Cbuild* Shortcut for 'cargo build`. :Cclean *:Cclean* Shortcut for 'cargo clean`. :Cdoc *:Cdoc* Shortcut for 'cargo doc`. :Cinit *:Cinit* Shortcut for 'cargo init`. :Crun *:Crun* Shortcut for 'cargo run`. :Ctest *:Ctest* Shortcut for 'cargo test`. :Cupdate *:Cupdate* Shortcut for 'cargo update`. :Cbench *:Cbench* Shortcut for 'cargo bench`. :Csearch *:Csearch* Shortcut for 'cargo search`. :Cpublish *:Cpublish* Shortcut for 'cargo publish`. :Cinstall *:Cinstall* Shortcut for 'cargo install`. :Cruntarget *:Cruntarget* Shortcut for 'cargo run --bin' or 'cargo run --example', depending on the currently open buffer. Formatting ---------- :RustFmt *:RustFmt* Runs |g:rustfmt_command| on the current buffer. If |g:rustfmt_options| is set then those will be passed to the executable. If |g:rustfmt_fail_silently| is 0 (the default) then it will populate the |location-list| with the errors from |g:rustfmt_command|. If |g:rustfmt_fail_silently| is set to 1 then it will not populate the |location-list|. :RustFmtRange *:RustFmtRange* Runs |g:rustfmt_command| with selected range. See |:RustFmt| for any other information. Playpen integration ------------------- :RustPlay *:RustPlay* This command will only work if you have web-api.vim installed (available at https://github.com/mattn/webapi-vim). It sends the current selection, or if nothing is selected, the entirety of the current buffer to the Rust playpen, and emits a message with the shortened URL to the playpen. |g:rust_playpen_url| is the base URL to the playpen, by default "https://play.rust-lang.org/". |g:rust_shortener_url| is the base url for the shorterner, by default "https://is.gd/" |g:rust_clip_command| is the command to run to copy the playpen url to the clipboard of your system. Evaulation of a single Rust file -------------------------------- NOTE: These commands are useful only when working with standalone Rust files, which is usually not the case for common Rust development. If you wish to building Rust crates from with Vim can should use Vim's make, Syntastic, or functionality from other plugins. :RustRun [args] *:RustRun* :RustRun! [rustc-args] [--] [args] Compiles and runs the current file. If it has unsaved changes, it will be saved first using |:update|. If the current file is an unnamed buffer, it will be written to a temporary file first. The compiled binary is always placed in a temporary directory, but is run from the current directory. The arguments given to |:RustRun| will be passed to the compiled binary. If ! is specified, the arguments are passed to rustc instead. A "--" argument will separate the rustc arguments from the arguments passed to the binary. If |g:rustc_path| is defined, it is used as the path to rustc. Otherwise it is assumed rustc can be found in $PATH. :RustExpand [args] *:RustExpand* :RustExpand! [TYPE] [args] Expands the current file using --pretty and displays the results in a new split. If the current file has unsaved changes, it will be saved first using |:update|. If the current file is an unnamed buffer, it will be written to a temporary file first. The arguments given to |:RustExpand| will be passed to rustc. This is largely intended for specifying various --cfg configurations. If ! is specified, the first argument is the expansion type to pass to rustc --pretty. Otherwise it will default to "expanded". If |g:rustc_path| is defined, it is used as the path to rustc. Otherwise it is assumed rustc can be found in $PATH. :RustEmitIr [args] *:RustEmitIr* Compiles the current file to LLVM IR and displays the results in a new split. If the current file has unsaved changes, it will be saved first using |:update|. If the current file is an unnamed buffer, it will be written to a temporary file first. The arguments given to |:RustEmitIr| will be passed to rustc. If |g:rustc_path| is defined, it is used as the path to rustc. Otherwise it is assumed rustc can be found in $PATH. :RustEmitAsm [args] *:RustEmitAsm* Compiles the current file to assembly and displays the results in a new split. If the current file has unsaved changes, it will be saved first using |:update|. If the current file is an unnamed buffer, it will be written to a temporary file first. The arguments given to |:RustEmitAsm| will be passed to rustc. If |g:rustc_path| is defined, it is used as the path to rustc. Otherwise it is assumed rustc can be found in $PATH. Running test(s) --------------- :RustTest[!] [options] *:RustTest* Runs a test under the cursor when the current buffer is in a cargo project with "cargo test" command. If the command did not find any test function under the cursor, it stops with an error message. When ! is given, runs all tests regardless of current cursor position. When [options] is given, it is passed to "cargo" command arguments. When the current buffer is outside cargo project, the command runs "rustc --test" command instead of "cargo test" as fallback. All tests are run regardless of adding ! since there is no way to run specific test function with rustc. [options] is passed to "rustc" command arguments in the case. rust.vim Debugging ------------------ :RustInfo *:RustInfo* Emits debugging info of the Vim Rust plugin. :RustInfoToClipboard *:RustInfoClipboard* Saves debugging info of the Vim Rust plugin to the default register. :RustInfoToFile [filename] *:RustInfoToFile* Saves debugging info of the Vim Rust plugin to the the given file, overwritting it. ============================================================================== MAPPINGS *rust-mappings* This plugin defines mappings for |[[| and |]]| to support hanging indents. ============================================================================== vim:tw=78:sw=4:noet:ts=8:ft=help:norl: